Fedrel
FM01
20-120 L/min, ±2%, 50 psig, resettable register/nonresettable total; fuel/solvent applications
Kranti / AEW / Turbine, vortex and process flow meters
KPT-100
Turbine process flowmeter
Dated list describes 15–150 mm and 90°C
MODEL OVERVIEW
What the KPT-100 offers
- Dated list describes 15–150 mm and 90°C
- separate brochure has a different scope. Suitable fluid, viscosity and calibration span require confirmation.
Manufacturer’s documented description: AEW/136, 11 August 2026, pp. 13. Options and qualifications above are retained as stated.
Check these document differences
Size and temperature
Kranti turbine brochure, undated, pp.3–4: to 200 NB and 120°C
AEW/136, 11 August 2026, p.13: 15–150 mm and 90°C
Request written confirmation for the offered size and configuration before using either value.
TECHNICAL DATA
KPT-100 specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | turbine vortex processAEW/136, 11 August 2026, 13 |
| Nominal diameter (DN) | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150S34 · 13 |
| Fluid temperature | Maximum 90°C in AEW/136; separate brochure says 120°CS34 · 13 |
| Connections | ASA150 flanged; BSP screwed options shown through DN50S34 · 13 |
| Power supply | 24 VDCS34 · 13 |
| Included outputs | 4–20 mA / RS485S34 · 13 |
| Documented size scope | 15-150 mmAEW/136, 11 August 2026, 13 |
| Body material | SS304 / SS316 optionsS34 · 13 |
| Response time | Less than 100 msS34 · 13 |
| Viscosity limit | 100 cP maximumS34 · 13 |
Kranti turbine brochure: flow and dimensions
S32 p.4
Brochure covers DN15–200 and a different temperature scope from the dated KPT-100 DN15–150 entry. Reference dimensions, not an approved installation drawing.
| DN (mm) | Minimum (m³/h) | Maximum (m³/h) | Length (mm) | Height (mm) | Flange OD (mm) | PCD (mm) | Hole diameter (mm) | Holes | Thickness (mm) |
|---|---|---|---|---|---|---|---|---|---|
| 15 | 0.6 | 6 | 75 | 250 | 88 | 60.4 | 15.9 | 4 | 15 |
| 20 | 0.8 | 8 | 90 | 256 | 98 | 69.9 | 15.9 | 4 | 16 |
| 25 | 1 | 10 | 110 | 263 | 108 | 79.2 | 15.9 | 4 | 16 |
| 32 | 1.5 | 15 | 140 | 272 | 117.3 | 88.9 | 15.9 | 4 | 16 |
| 40 | 2 | 20 | 140 | 280 | 127 | 98 | 15.9 | 4 | 19 |
| 50 | 4 | 40 | 150 | 298 | 152.4 | 120 | 18 | 4 | 19 |
| 65 | 7 | 70 | 200 | 318 | 178 | 139.7 | 19 | 4 | 19 |
| 80 | 10 | 100 | 200 | 332 | 190.5 | 152.4 | 19 | 4 | 19 |
| 100 | 20 | 200 | 250 | 361 | 228.6 | 190.5 | 19 | 8 | 19 |
| 125 | 25 | 250 | 300 | 386 | 254 | 215.9 | 19 | 8 | 22.2 |
| 150 | 30 | 300 | 300 | 411 | 279.4 | 241.3 | 22.2 | 8 | 22.2 |
| 200 | 80 | 800 | 350 | 468 | 342.9 | 298.5 | 22.2 | 8 | 22.2 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Working pressure and temperature
- Approvals and scope
DUTY & SELECTION
Where to consider this type
These may be appropriate for specialist industrial duties even when they are not the usual choice for a domestic water connection.
Installation and commissioning
Before the meter is selected
- Liquid versus steam duty and fluid compatibility
- Viscosity, range, response and repeatability
- Minimum batch or process control requirement
- Pressure/temperature envelope and wetted materials
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
No electronic output is established for the base record. Confirm a compatible pickup or communication variant if remote reading is required; do not assume another model’s output can be fitted.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the Kranti / AEW technical reference → · Browse the source index
Source: AEW/136, 11 August 2026, pp. 13. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for KPT-100
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.
Fedrel
FM04
Turbine digital oil meter; also lists water application; SS body/aluminium enclosure, 10-120 L/min, ±1%, 20 bar, 10-50°C, battery
Fedrel
FM06
DI, 16 bar, 10-60°C, ±1%, printed ±3% repeatability; optional 4-20 mA/pulse; not established as potable-water service