Single-jet water meters family line illustration — Illustrative family drawing · actual LIV-WM-BS-SJ-002 configuration may differ

Lehry / Single-jet water meters

LIV-WM-BS-SJ-002

Name: Lehry LIV-WM-BS-SJ-002
Brand: Lehry

Brass single jet, hot to 90°C

Same reading features and stated 10 L/pulse

Enquire about this model ↗Compare model

Supply from Hyderabad · India-wide delivery
Configuration, availability and commercial terms confirmed on quotation.

MODEL OVERVIEW

What the LIV-WM-BS-SJ-002 offers

Same reading features and stated 10 L/pulse

Manufacturer’s documented description: Lehry DLP, 25 August 2025, pp. 45–46. Options and qualifications above are retained as stated.

TECHNICAL DATA

LIV-WM-BS-SJ-002 specifications

Parameter	Documented value
Measuring principle	single jetLehry DLP, 25 August 2025, 45–46
Nominal diameter (DN)	15, 20S5 · 45
Fluid temperature	Maximum 90°CS5 · 45
Included outputs	Pulse wire described with this modelS5 · 45
Pulse litres per pulse	10 L/pulse when fittedS5 · 45
Documented size scope	15, 20 mmLehry DLP, 25 August 2025, 45–46
Body material	BrassS5 · 45
Register options	Anti-magnetic; hermetically sealed dry dial; direct readingS5 · 45

Details to confirm for the offered configuration

These parameters are not established as exact-model values in this record. Some may not apply to this technology.

Q1 m3 h
Q2 m3 h
Q3 m3 h
Q4 m3 h
Working pressure and temperature
Connections
Approvals and scope

DUTY & SELECTION

Where to consider this type

The guidance below explains the technology. It does not extend this model’s documented service limits.

A single stream of water drives an impeller. These meters are commonly offered for small connections and individual consumption points.

Full single-jet water meters guide ↗

Installation and commissioning

Before the meter is selected

Actual minimum and continuous flows
Approved orientation and register position
Included couplings and strainer
Temperature-rated version and optional output

Before the system is handed over

Confirm the installation drawing, orientation and access for service.
Match the actual flow range and permitted pressure loss to the project.
Record meter serial number, start reading and any output scaling.
Commission communications against the receiving system and retain the test record.

Read the installation guide ↗

Reading and communication

Documentation mentions: Pulse output. These may be optional or specific to a variant.

Discovery tags come from the documented description, including optional capabilities. Confirm inclusion and exact size/configuration.

A connected metering system is five parts: meter → interface or module → network or gateway → software → billing, dashboard or control system. A quotation should name who supplies and maintains each one. AMR-ready equipment may still require separately quoted radio, gateway, head-end and billing software.

Understand pulse, wired and wireless reading ↗

Documents and purchase checks

Read the Lehry technical reference → · Browse the source index

Source: Lehry DLP, 25 August 2025, pp. 45–46. Reviewed 2026-09-09.

Download product data (JSON)Request current drawing / datasheet ↗

Ask for these before ordering

Approved drawing for the exact model, size and configuration
Serial-number calibration or factory test record
Applicable approval certificate and exact scope
Installation manual and required straight pipe
Protocol/register map and output power requirements
Option/accessory codes with included components
Pressure-loss curve, flange drilling and face-to-face length
Current written commercial and warranty terms

SPECIFY YOUR REQUIREMENT

Get a quotation for LIV-WM-BS-SJ-002

Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.

Price and lead time are quoted for the selected size and configuration.