Fedrel / Multijet water meters
FM107
Vertical multijet, DI in the 2017 sheet
Legacy sheet pairs FM106 brass with FM107 DI. The 2026 list uses FM106 for DI. Confirm current identity, material and drawing before ordering.
MODEL OVERVIEW
What the FM107 offers
- Legacy sheet pairs FM106 brass with FM107 DI. The 2026 list uses FM106 for DI. Confirm current identity, material and drawing before ordering.
Manufacturer’s documented description: Fedrel legacy catalogue, 2017, pp. FM107 entry; page not verified. Options and qualifications above are retained as stated.
TECHNICAL DATA
FM107 specifications
| Parameter | Documented value |
|---|---|
| Measuring principle | multijetFedrel legacy catalogue, 2017, FM107 entry; page not verified |
| Fluid temperature | Cold water below 45°CS28 · Physical PDF p.1 |
| Body material | Ductile iron (2017 FM107 identity)S28 · Physical PDF p.1 |
| Installation orientation | Vertical pipelineS28 · Physical PDF p.1 |
| Register options | Hermetically sealed extra-dry register; magnetic transmissionS28 · Physical PDF p.1 |
| Standards claim | ISO 4064 Class B; document cites IS 779, IS 6784 and OIML R49; current certificate not verifiedS28 · Physical PDF p.1 |
| Calibration documentation | Sheet states all products calibrated and results available on requestS28 · Physical PDF p.1 |
Details to confirm for the offered configuration
These parameters are not established as exact-model values in this record. Some may not apply to this technology.
- Q1 m3 h
- Q2 m3 h
- Q3 m3 h
- Q4 m3 h
- Working pressure and temperature
- Connections
- Approvals and scope
DUTY & SELECTION
Where to consider this type
Several jets drive the impeller around its circumference. Multijet products are widely represented in domestic and small commercial catalogue ranges.
Installation and commissioning
Before the meter is selected
- Standard and edition behind Class A/Class B wording
- The exact model’s low-flow limits
- Wet/dry register and magnetic coupling
- Hot-water version, pulse pickup and counter scope
Before the system is handed over
- Confirm the installation drawing, orientation and access for service.
- Match the actual flow range and permitted pressure loss to the project.
- Record meter serial number, start reading and any output scaling.
- Commission communications against the receiving system and retain the test record.
Reading and communication
No electronic output is established for the base record. Confirm a compatible pickup or communication variant if remote reading is required; do not assume another model’s output can be fitted.
Understand pulse, wired and wireless reading ↗Documents and purchase checks
Read the Fedrel technical reference → · Browse the source index
Source: Fedrel legacy catalogue, 2017, pp. FM107 entry; page not verified. Reviewed 2026-09-09.
Ask for these before ordering
- Approved drawing for the exact model, size and configuration
- Serial-number calibration or factory test record
- Applicable approval certificate and exact scope
- Installation manual and required straight pipe
- Protocol/register map and output power requirements
- Option/accessory codes with included components
- Pressure-loss curve, flange drilling and face-to-face length
- Current written commercial and warranty terms
SPECIFY YOUR REQUIREMENT
Get a quotation for FM107
Tell us the size and quantity you need. Add the fluid, flow or output requirement if known. You can review and send the enquiry from your email app on the next page.
Compare related models
Similar technology does not mean equivalent performance. Compare exact configurations.